Description
Don't miss out on the 2010 $750 Rebate for T-180 Mowers! The T-180 has been the backbone for Highway Departments for over 40 years. When you need a cutter to show up on days that you don't then the T-180 is ready for the job.
Technology
**Download T-180 Rotary Mower Spec Sheet By Clicking Here**
With standard tires and single curtain chains: 4,990 lb.
*These specifications are standard; however, any State Department of Transportation Specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.
Gearboxes — 540 RPM or 1,000 RPM
Three spindle gearboxes, 190 HP, base mounted, 1 : 1.47 ratio. One divider box, 250 HP, base mounted. All gearboxes have malleable housings, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings. 20 splined 1 3/4” input shaft, 2 1/8” output shaft on spindle boxes.Drive Shafts
Shielded PTOs made from finest quality propeller shaft materials and needle bearing universal joints. Category 5 80-degree constant velocity main drive shaft, Category 4 intermediate and wing drive shafts.Slip Clutch
Three heavy-duty clutches with spring type adjustment and four friction discs.Blades
1/2” by 4” material, alloy spring steel, airlift design. Free swinging when encountering obstructions. 8” overlap for better cutting. Blade tip speed: 15,500 FPM.Wheels
Six solid rubber tires standard. Independent shock absorbing system for all wheel axles. Cutting height adjustable from 2’’ to 17.’’ Optional: aircraft tires or implement tires.Bush-Whacker Special Deck (3/16” Material)
Heavy-duty, one-piece electric welded frame for wings and center section, 1/4” rolled I-Beam sides, heavy mechanical tubing structuals.Hydraulic Adjustments
Hydraulic lift cylinders control raising and lowering of flexible wings (winch assembly for manual wing lift is optional). Wings may be raised to 90 degrees above horizontal and lowered to 22 degrees below horizontal cutting plane. Optional: rephasing level lift systems.Chain Guards Front and Rear
Dimensions
Cutting width: 15’. Cutting height: adjustable from 2” to 15”. Overall width: 190”. Overall length: 167”. Transportation width: 88”. Cutting height for aircraft and implement tires: 2” to 17”.Weight
Without chains and tires: 4,260 lb.With standard tires and single curtain chains: 4,990 lb.
Other Standard Features Include
Replaceable center and wing skid shoes, transport locking bars for each wing, heavy-duty tongue assembly with dual leveling rods, hydraulic hose holder, jack for easy hookup and unhooking from tractor.*These specifications are standard; however, any State Department of Transportation Specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.